This is not a government, MEA or PEA website. Register for the grant only at peoplesolar.mea.or.th or peoplesolar.pea.co.th.

Updated 17 November 2026

Solar producing less than expected? Causes and checks, 2026

First compare this month's output with what the month should produce: in Bangkok a 5 kW system's modelled output falls from about 718 kWh in March to about 516 kWh in September, roughly 28% less, before anything is wrong [1]. If output is low against that benchmark, the usual causes are dirt, which costs Thai PV plants up to 3% of output a month [2], new shade, the inverter tripping on high grid voltage [3], the export limit or a faulty panel or connection. Most checks cost nothing; an installer's system check costs about 1,500 to 3,000 THB [4].

Key facts

  • PVGIS models a 5 kW system in Bangkok at about 7,280 kWh a year, with March the best month and September the worst [1].
  • In Chiang Mai, July output is about 41% below March, the largest seasonal swing of the eight provinces we cover [5].
  • A study of Thai PV plants found that soiling cuts performance by up to 3% a month [2].
  • Inverters disconnect when grid voltage rises above their set limits, which happens more often on weak grids with a lot of solar [3]; MEA and PEA (the Metropolitan and Provincial Electricity Authorities, กฟน. and กฟภ., Thailand's two state power distributors) also require Volt-Watt control, which reduces output at high voltage [6].
  • Systems with more than 5 kW of inverter capacity must fit an export limiting device, which caps output when the home uses little power [6].
  • Panel cleaning costs about 2,500 to 4,000 THB a visit and a detailed system check about 1,500 to 3,000 THB [4].

kWp is the peak capacity of the solar panels; kW is the size of the inverter or the system.

What causes low output, and what does each cost to fix?

Cause How it shows in the app What to check Typical cost Who fixes it
Season and cloud Whole days lower, smooth curve Compare with the same month's benchmark [1] Nothing Not a fault
Dirt or bird droppings Slow decline over weeks, recovers after rain Look from the ground; compare before and after rain [2] 2,500 to 4,000 THB a clean [4] Cleaning service or installer
New shade Dips at the same time each day Trees, new buildings, water tanks Tree trimming Owner
Grid overvoltage trips Gaps around midday, alarm such as grid overvoltage [3] Inverter alarm log; time of day Usually none to you Utility, with the installer [6]
Volt-Watt reduction Output flattens below normal at midday on high-voltage days [6] Inverter log of grid voltage Usually none to you Utility, with the installer
Export limit Flat line when the home uses little power System above 5 kW; compare with home use [6] None; design choice Installer, if mis-set
Inverter clipping Flat top at the inverter's rating on clear days Inverter rating against panel watts [7] None; design choice Not a fault
Faulty panel, string or connector One string or panel far below the others String readings in the app or by the installer 1,500 to 3,000 THB for a check [4] Installer; panel maker under warranty
Monitoring offline Zero in the app, but the meter still shows export or lower use Wi-Fi and data logger None Owner or installer
Inverter fault Error code, no output Error code against the manual Replacement 30,150 to 37,850 THB if out of warranty [8][9] Installer; inverter maker under warranty

As of 17 November 2026. Cleaning and check prices are installer estimates.

How do you check, step by step?

  1. Set the benchmark. For each month, multiply your system size in kW by the monthly figure for your area: in Bangkok about 143.6 kWh per kW in March and 103.1 in September [1].
  2. Compare like with like. Compare with the same month last year, not with last month.
  3. Read the daily curve. A smooth bell shape that is simply lower points to weather or dirt; gaps point to trips; a flat top points to clipping or the export limit [3][6][7].
  4. Read the alarm log. Note the error codes and the times they occur.
  5. Look from the ground. Check for dirt, shade, damage and loose cables; do not climb on the roof or the panels [10].
  6. Clean only if it pays. If the drop is about the size of a few months of soiling, cleaning recovers it; see cleaning.
  7. Call the installer if output stays more than about 10 to 15% below your benchmark over two sunny weeks after cleaning, or the alarm log shows repeated trips (our rule of thumb).

When should you call the installer or the utility?

  • Repeated grid overvoltage trips: ask the installer to send the inverter log to MEA or PEA. Do not change the inverter's grid settings yourself; the utility approves them [6].
  • One string or panel far below the others: this points to a panel, connector or cable fault covered by the installation warranty in the first one to three years [11][12].
  • Burning smell, heat or discoloured connectors: shut the system down as the manual describes and call a licensed electrician; see solar safety.

What do the warranties cover?

  • Installation warranty: workmanship such as connectors and cabling, usually 1 to 3 years in the packages we read [11][12].
  • Inverter warranty: 10 years on Huawei's 5 kW hybrids [8][9].
  • Panel power warranty: the maker guarantees no more than 1% loss in year one and about 0.35% a year after, but claims usually need test evidence; normal seasonal and soiling losses are not covered [13].
  • Maintenance: a system not maintained according to the maker's manual may lose its warranty [10].

Read next: installer rankings, how we score, cleaning, warranties explained, inverter brands compared, permits step by step and solar in Bangkok.

Frequently asked questions

How much should a 5 kW solar system produce per month in Thailand?

In Bangkok, PVGIS models about 7,280 kWh a year for a 5 kW system, from about 718 kWh in March to about 516 kWh in September. Real output varies with roof angle, shade and dirt, so build your own benchmark from your first full year and compare each month with the same month the year before.

Why does my solar produce less in the rainy season?

Cloud cuts the sunlight reaching the panels. In Bangkok, September output is about 28% below March in PVGIS's model, and in Chiang Mai July is about 41% below March. This is normal and is already in the yearly payback figures. Rain also washes the panels, which can make output recover after a dry spell.

Why does my inverter shut off at midday?

A common cause is high grid voltage. When many homes export power at midday, the voltage at your connection can exceed the inverter's limit, and it disconnects until the voltage falls. The app's alarm log will show a grid overvoltage code. Ask the installer to send the log to MEA or PEA rather than changing settings yourself.

Why is my solar output flat at midday?

Either the inverter is at its rated output, called clipping, or the export limit is holding back power because the home is using little. Both are design choices rather than faults. Clipping costs little energy when the panels slightly exceed the inverter rating. If the export limit cuts often, using more power at midday recovers it.

Does dirt really reduce solar output in Thailand?

Yes. A study of Thai PV plants found soiling reduces performance by up to 3% a month, more near quarries and cassava or corn farms. Rain cleans panels for much of the year, so many homes need cleaning only when the app shows a clear drop. Cleaning costs about 2,500 to 4,000 THB a visit.

Is low production covered by the panel warranty?

Only if a panel performs below its warranted output, for example more than 1% loss in year one or about 0.35% a year after for leading N-type panels. Seasonal, shade and dirt losses are not defects. Ask the installer to test the suspect panel and document the result before you claim, and keep the system maintained as the manual requires.

Back to top

Sources

  1. European Commission JRC: PVGIS 5.3, PVGIS-ERA5, 1 kWp, 14% losses, optimal tilt, Bangkok (13.75, 100.50), monthly output. https://re.jrc.ec.europa.eu/api/v5_3/PVcalc?lat=13.75&lon=100.5&peakpower=1&loss=14&outputformat=json&optimalangles=1 Read 17 November 2026.
  2. KMUTT: seasonal dust accumulation at four PV plants in Thailand; soiling reduces PV plant performance by up to 3% a month. https://kirim.kmutt.ac.th/converis/portal/detail/Publication/1511401245?lang=en_GB Read 17 November 2026.
  3. Solis: the OV-G-V grid overvoltage alarm; the inverter disconnects when grid voltage exceeds its limits, common on weak grids with high PV capacity. https://www.solisinverters.com/lk/documentation/40289f9e8abbfdab018abc99647b42ec.html Read 17 November 2026.
  4. Thansettakij: one million rooftop solar households, cleaning and maintenance costs after installation. https://www.thansettakij.com/economy/670304 Published 30 September 2026, read 17 November 2026.
  5. European Commission JRC: PVGIS 5.3, PVGIS-ERA5, 1 kWp, 14% losses, optimal tilt, Chiang Mai (18.79, 98.98), monthly output. https://re.jrc.ec.europa.eu/api/v5_3/PVcalc?lat=18.79&lon=98.98&peakpower=1&loss=14&outputformat=json&optimalangles=1 Read 17 November 2026.
  6. Thansettakij: selling power to the utility in 2026, listed inverters with Volt-Watt and Volt-Var control, and export limiting above 5 kW. https://www.thansettakij.com/general-news/663189 Read 13 November 2026.
  7. Wattuneed: Sungrow SG5.0RS, 5 kVA output, maximum PV input power 7,500 W. https://www.wattuneed.com/en/inverters-converters/25996-sungrow-single-phase-5-kva-230v-sg50rs-inverter-0768563819827.html Read 17 November 2026.
  8. Advice: Huawei SUN2000-5KTL-LB0 hybrid inverter, 30,150 THB, 10-year warranty. https://www.advice.co.th/nescen-n001/product/productdetail/A0179396 Read 13 November 2026.
  9. Advice: Huawei SUN2000-5K-MAP0 hybrid inverter, 37,850 THB, 10-year warranty. https://www.advice.co.th/nescen-n001/product/productdetail/A0170454 Read 13 November 2026.
  10. LONGi: PV module user manual; failure to follow it may void the warranty. https://static.longi.com/LON_Gi_PV_Module_User_Manual_for_DGBG_1_0_260409_114d652c10.pdf Read 17 November 2026.
  11. HomePro: Home Solar 3 kW 1-phase Normal, 1-year installation warranty. https://www.homepro.co.th/p/1254037 Read 13 November 2026.
  12. HomePro: ENERGY LIB P1 ALL IN ONE 8 kW set, 3-year installation warranty. https://www.homepro.co.th/p/1279912 Read 17 November 2026.
  13. LONGi: Hi-MO X10, 1% first-year and 0.35% yearly degradation. https://longi.com/eu/news/hi-mo-x10-uk-launch Read 17 November 2026.