This is not a government, MEA or PEA website. Register for the grant only at peoplesolar.mea.or.th or peoplesolar.pea.co.th.

Updated 17 November 2026

What "Tier 1" solar panels mean, and what to check instead, 2026

"Tier 1" is BloombergNEF's list of panel makers that banks have financed: a maker qualifies by supplying its own-brand, self-made panels to six projects of at least 10 MW, financed without recourse by six different banks within two years [1][2]. BloombergNEF itself recommends that buyers and banks do not use the list as a measure of quality [1]. For a Thai home in 2026, the checks that matter more are the TIS 61730 Part 2 licence, which has been mandatory since 30 October 2026, the degradation rate and the warranty that someone in Thailand will honour [3][4].

Key facts

  • BloombergNEF updates the Tier 1 list every quarter; it published the Q3 2026 list as an indicator of bankability, not a quality certificate [5].
  • In 2025 BloombergNEF raised the minimum project size it counts from 5 MW to 10 MW [6].
  • From 30 October 2026, crystalline silicon panels made, imported or sold in Thailand must meet TIS 61730 Part 2-2567, and sellers may sell only licensed products [3].
  • The standard tests heat resistance, insulation, leakage, fire spread and mechanical strength; 259 licences had been issued by 28 October 2026, and violations carry fines of up to 2 Mn THB [4].
  • Kiwa PVEL's 2026 Scorecard, updated in November 2026, names 48 manufacturers as Top Performers in at least one reliability test [7]; in its May edition, 87% of manufacturers had at least one test failure [8].
  • Leading N-type panels lose no more than 1% of output in year one and 0.35% a year after, with 30-year power warranties [9][10].

kWp is the peak capacity of the solar panels; kW is the size of the inverter or the system.

Who should care about Tier 1, and who should not?

It helps as a first filter on an unfamiliar brand: a maker on the list has supplied large financed projects recently, which suggests it is likely to be around to honour a long warranty [2].

It does not help to choose between well-known brands, or to judge a particular panel model. Two panels from the same Tier 1 maker can differ in degradation, temperature performance and warranty, and the list says nothing about the installer [1].

What should you check instead of Tier 1?

  1. The TIS licence. Since 30 October 2026 panels sold in Thailand must meet TIS 61730 Part 2-2567; ask for the licence number for the model quoted [3][4].
  2. Degradation. A panel that loses 1% in year one and 0.35% a year after keeps about 90.6% of its rating in year 25; at 0.4% a year it keeps about 89.4% [9][11].
  3. Product warranty. Product warranties on current panels range from 12 years (Jinko Tiger Neo 3.0) to 15 years extendable to 25 (Trina Vertex S+), against 30 years on power output [11][12].
  4. Independent testing. A Kiwa PVEL Top Performer listing for the panel's bill of materials shows how it held up in extended stress tests [7][8].
  5. Temperature coefficient. LONGi's Hi-MO X10 loses 0.26% of power per degree Celsius above 25°C; on a hot Thai roof, a difference of 0.04 points is worth about 1.2% of output at a cell temperature of 55°C [10] (our calculation).

Worked example: two panels on a 5 kW home system

Point Panel A Panel B
Listed as Tier 1 Yes Yes
Yearly degradation after year one 0.35% 0.40%
Output in year 25, share of rating About 90.6% About 89.4%
Extra energy over 25 years About 1,000 kWh more than Panel B Baseline
Value at 4.84 THB per kWh About 4,900 THB Baseline

Assumptions: 5 kW producing 1,350 kWh per kW in year one; 1% first-year loss for both; linear degradation as warranted; self-used power at 4.84 THB per kWh including Ft (ค่าเอฟที, the fuel adjustment charge added to every kWh) and VAT for homes using more than 400 kWh a month [13] (our calculation). Both panels are "Tier 1", yet the label does not show the difference; the datasheet does.

What are the common mistakes?

  • Treating Tier 1 as a quality grade. BloombergNEF says not to [1].
  • Accepting "Tier 1" on a quote without a model number. Retail listings use the label, for example HomePro's Home Solar packages describe their RISEN panels as Tier 1 [14]; ask for the exact model and its datasheet.
  • Skipping the TIS check. Since 30 October 2026 an unlicensed panel should not be on sale at all [3].
  • Ignoring who handles claims. A 30-year warranty is only as useful as the maker's or distributor's presence in Thailand; ask who takes a faulty panel and who pays for removal.

Read next: installer rankings, how we score, solar panels compared, warranties explained, lifespan and degradation and how to compare quotes.

Frequently asked questions

What does Tier 1 mean for solar panels?

Tier 1 is BloombergNEF's quarterly list of panel makers whose own-brand, self-made panels went into six projects of at least 10 MW, financed without recourse by six different banks within two years. It measures bankability. BloombergNEF says buyers and banks should not use it as a measure of panel quality.

Are Tier 1 panels better quality?

Not necessarily. The list shows that banks have financed large projects using the maker's panels, which suggests the maker is established. It does not test any panel. For quality, look at the datasheet degradation rate, the temperature coefficient, the TIS licence and independent results such as Kiwa PVEL's Scorecard, which found test failures at 87% of manufacturers in 2026.

Do panels sold in Thailand need a TIS mark?

Yes. From 30 October 2026, crystalline silicon panels made, imported or sold in Thailand must meet TIS 61730 Part 2-2567, and makers and importers need a licence before selling. Sellers may sell only licensed products, and violations carry fines of up to 2 Mn THB. Ask your installer for the licence number of the panel quoted.

Where can I find the current Tier 1 list?

BloombergNEF publishes the list to its clients each quarter, and some distributors and makers republish it. Because it changes quarterly and is meant for financiers, check the date of any copy you see, and treat the label on a quote as a starting point, not as proof of the panel's quality.

Is a non-Tier 1 panel a bad choice?

Not automatically. A smaller or newer maker may sell a well-tested panel without enough large financed projects to qualify. What matters for a home is the TIS licence, the datasheet, independent test results and a warranty that someone in Thailand will honour. If the maker is unfamiliar, ask who stands behind the warranty locally.

What panel warranty should I expect in 2026?

Current N-type panels from leading makers carry a 30-year power warranty, with no more than 1% loss in year one and about 0.35% a year after. Product warranties are shorter, 12 to 25 years depending on the brand and model. Ask for both in writing, with the name of the Thai company that handles claims.

Back to top

Sources

  1. BISOL: BloombergNEF's Tier 1 methodology of 9 July 2025, quoted; six non-recourse projects of at least 10 MW with six different commercial banks; "do not use the list as a measure of quality". https://www.bisol.com/post/bisol-position-statement-bloombergnef-tier-1-list-not-a-measure-of-pv-module-quality Published 8 September 2025, read 17 November 2026.
  2. Solar Builder: Tier 1 requires own-brand, self-manufactured products supplied to six projects financed by six different banks within the last two years. https://solarbuildermag.com/?p=54885 Read 17 November 2026.
  3. Thai PBS Policy Watch: crystalline silicon panels must meet TIS 61730 Part 2-2567 from 30 October 2026; licences for makers and importers; sellers may sell only licensed products. https://policywatch.thaipbs.or.th/article/economy-311 Read 17 November 2026.
  4. Post Today: the panel standard tests heat resistance, insulation, leakage, fire spread and mechanical strength; 259 licences; fines of up to 2 Mn THB. https://www.posttoday.com/smart-city/751056 Published 28 October 2026, read 17 November 2026.
  5. VICO Export: BloombergNEF's Tier 1 list for Q3 2026, an indicator of bankability, not a quality certificate. https://www.vicoexport.com/en/?p=68446 Read 17 November 2026.
  6. VICO Export: Tier 1 list for Q2 2025; the minimum project size rose from 5 MW to 10 MW in 2025. https://www.vicoexport.com/en/?p=61277 Read 17 November 2026.
  7. Kiwa PVEL: 2026 PV Module Reliability Scorecard, updated November 2026, 48 manufacturers named as Top Performers. https://scorecard.pvel.com/ Read 17 November 2026.
  8. PV Tech: in Kiwa PVEL's 2026 Scorecard, 87% of manufacturers and 61% of bills of materials had at least one test failure. https://www.pv-tech.org/module-test-failures-continue-to-increase-in-kiwa-pvels-2026-module-reliability-scorecard/ Read 17 November 2026.
  9. JinkoSolar: Tiger Neo 3.0, under 1% first-year and 0.35% yearly degradation, 30-year power warranty. https://www.jinkosolar.com/en/site/newsdetail/3020 Read 17 November 2026.
  10. LONGi: Hi-MO X10, 1% and 0.35% degradation, -0.26%/°C. https://longi.com/eu/news/hi-mo-x10-uk-launch Read 17 November 2026.
  11. Trina Solar: Vertex S+ TSM-NEG9R.25 datasheet, 15-year product warranty extendable to 25, 30-year power warranty, 0.4% yearly degradation. https://www-cdn.trinasolar.com/wwwstorage/sites/4/DT-M-0084-JP-F-Datasheet_Vertex-S_NEG9R.25_2025_B.pdf Read 17 November 2026.
  12. pv magazine: JinkoSolar launches a 670 W TOPCon module with 12-year product and 30-year power warranties. https://www.pv-magazine.com/2025/09/05/jinkosolar-launches-670-w-topcon-solar-module-with-24-8-efficiency/ Published 5 September 2025, read 17 November 2026.
  13. Government Public Relations Department: the new tariff structure from the September 2026 bill. https://www.prd.go.th/th/content/category/detail/id/33/iid/536793 Published 30 August 2026, read 17 November 2026.
  14. HomePro: Home Solar 10 kW 3-phase, RISEN N-type 625 W panels described as Tier 1. https://www.homepro.co.th/p/1256865 Read 17 November 2026.